Does GePRC CineKing mean anything to you? It’s normal, I told you about it here. It is a Tinywhoop type nano racer, even Cinewhoop oriented, since it is able to film in 4K and provide real-time video feedback. This model is almost the same, with a flight controller based on an F4 processor, a 12A 4-in-1 ESC, 2-inch quadripetal propellers, all supporting Lipo 3S and 4S.
Instead of the 4K Tarsier camera, GePRC has installed a 4K RunCam Hybrid. The principle is the same: it is a box with a dual camera, FPV and 4K, associated with a recording component on a microSD memory card. Unfortunately, I have not yet tested this camera to evaluate it against the Tarsier. The video transmitter is a 5.8 GHz compatible with 40 channels, with a power of 25 mW (the maximum allowed in France), 100 mW or 200 mW. It is optional, with the possibility of adjustment from the remote control and the active OSD, via the IRC Tramp protocol.
A 450 or 550 mAh 3S or 4S battery is required. GePRC offers to deliver the device without a receiver, or with a Flysky A8S, FrSky R-XSR or XM+, or TBS Crossfire Nano receiver. The GePRC CineKing 4K RunCam version will be available from $229.99 at Banggood store.
Features |
Runcam Hybrid HD Video Recording: 4K@30fps / 2.7K@60fps / 2.7K@50fps / 1080P@120fps / 1080P@100fps / 1080P@60fps / 1080P@50fps Dual Camera System: True 145° Wide Angle 4K HD & FPV Camera New Propeller Guard: Better airflow, higher flight efficiency. Using STABLE F411 electronic system, which is very stable. Full Soft Mounted FC System: Provides a clean operating environment for gyro. Say Goodbye to Jelly: Stable video and comfortable FOV. The newly designed GEP-CK2 frame has a more reasonable layout. Aerial Photography Friendly: No sight of propellers and propeller protection frames in your video. Exquisite Assembly Process: Eliminate any potential installation problems. Fine pre-tuned PIDs by GEPRC team, you can bind and fly. |
Specification |
Model: CineKing Frame: GEP-CK2 Wheelbase: 95mm FC: STABLE F411 SYSTEM Camera: RunCam Hybrid 4K Propeller: 2inch Receiver option: Frsky XM+/ Frsky R-XSR//TBS Nano SE/FlySky Motors: GR1105 5000KV Recommend battery: 3-4S 450-550mAh Battery Weight: 4s version 99g (Without battery) Specifications(Runcam Hybrid 4K): HD sensor:SONY 8MP Analog sensor:SONY 1.3MP Field of View (FOV):HD Recording FOV 145°(FPV FOV 150° @ 4: 3) Video Resolution:4K@30fps / 2.7K@60fps / 2.7K@50fps / 1080P@120fps / 1080P@100fps / 1080P@60fps / 1080P@50fps TV Mode:NTSC (720*480)/PAL (720*576) Switchable Interface:HD supports UART remote control; FPV(Analog) supports UART fimrware update. Lens Specs: HD Lens : M10 FPV Lens : M8 Power Input:DC 5-20V (Non-direct power supply from 4s battery or above. Powered directly with battery will generate surges and burn the camera.) Working Current:480mA @5V / 140mA @12V Max Micro SD Card Supported: Up to 128G. U3 recommended (2.7K60/1080P120 requires U3 or above; other solutions require U1 or above) Please make sure that the file format of the SD card is FAT32, otherwise, it will easily cause errors. Runcam Hybrid 4K: Manual STABLE F411 Micro System: STABLE F411 Flight Controller(16*16mm) MCU: STM32F411 IMU: MPU6000 gyro/accelerometer (SPI) OSD: BetaFlight OSD w/ AT7456E chip BEC Output: 5V@2A Size: 21mm*21mm Mounting holes: 16mm*16mm Integrated LC Filter Input voltage 2-4S LIPO Firmware target: MATEKF411 STABLE F411 BLheli_S 4IN1 12A ESC(16*16mm) MCU: BB21F16G Continuous current: 12A Input voltage : 2-4S LIPO ESC protocol: pwm, oneshot125, multishot, dshot150, 300, 600, etc. Size: 23mm*21mm Mounting hole 16*16mm Firmware target: Blheli_S G_H_30 Current meter: 210 STABLE F411 VTX 5.8G 200mW(16*16mm) Power : PIT/25/100/200mW Antenna interface : IPEX (UFL) Telemetry: IRC Tramp Size: 17mm*27mm Mounting holes: 16*16mm Integrated LC Filter |
Ratings are based on objective reviews from our users.