FlyFox Nano3

FlyFox Nano3 F4 1S 3 Inch Long Range FPV Racing Drone

The new trend is the nano racers with a 1S power supply based on a 18650 rechargeable battery. After the Rekon 3 from HGLRC, here is the Nano3 from Flyfox! The structure is in carbon, with brushless motors RCinPower 1202 Plus at 11500KV for two-bladed propellers 3 inches Gemfan 3018. The flight controller is an SPCmaker F411 FC AIO based on an F4 processor, flashed with Betaflight, which includes a 4 in 1 ESC of 8A.

The video part is provided by a RunCam Nano2 camera, a 1200TVL. It is associated with a 5.8 GHz analog video transmitter PandaRC VT5804 Nano. It is compatible with 40 channels, and transmits at 25 mW (the maximum allowed in France), but also 50, 100, 200 and 400 mW to go further.

What you need to take off? FlyFox does not provide a battery, but recommends a rechargeable 18650 1S battery of 3000 mAh, ensuring that the autonomy reaches 15 minutes. According to FlyFox, the Nano3 weighs 102.5 grams with its battery. The device is offered without a radio receiver – it’s up to you to install your own -, or pre-installed with an AFHDS 2A receiver from Flysky, XM+ from FrSky, or Crossfire Nano RX from TBS.

SPECS