Geeetech A10M

Geeetech A10M Mix-color 3D Printer

A10M 3D printer,with its unique dual extruder design,proves to be a desktop workhorse for you to unleash unlimited imagination and enrich your 30 printing life! Mix-color printing,creative ideation!

Standard Printing Volume & 360 Full view

keeping prusa i3 3D printers’ gantry structure and with its build volume as 220*220*260 mm, A10M makes the best of the building platform and enables you to view the print in360.

Featuring printing accuracy of 0.1mm, Geeetech A10M delivers exquisite prints with delicate texture contour and stable structure.

V-Shaped Rails and Wheels

The V-shaped wheels and rails on each axis, made from wear-resistant aluminum profile, could, in a large measure, reduce the printing noise and offer you a quiet 3D printing environment.

Good Adhesion & Uniform Heating

The building platform of A10M is even and better adhesion. The hotbed heats uniformly and could rapidly reach the target temp. It is a piece of cake to take the print down the platform when the hotbed cools off.

Simple and Extraordinary

A10M 3D printer is an upgraded version of A10, keeping its consistent and stable printing accuracy. its classic blue and black color combo and neat structure impart a touch of simplicity and excellence, which also embodies our commitment to quality products.

Break-resuming capability

The break-resuming capacity, a resurrection system, is added to save real-time printing status and resume the printing job exactly at the same place where it has been stopped. This add-on totally drives away the hassle of repetitive and time-consuming printing jobs caused by unexpected power outage. Totally get you out of worries about printing large-size 3D models.

Filament detector

Filament detector kills the pain caused by filament outage or fracture. The detecting in case the printer would run in air or the spool is empty. this add-on would, in a large measure, avoid bootless printing as well as enhancing your printing satisfaction.

Auto-leveling

The main board of A10M is professionally coded to support auto-leveling function. All you need to do is connect the leveling sensor with your A10M. the whole operation process is effort-saving and would greatly enhance the adhesion of the first layer.

Remote control

Easy print 3D App has simple UI, greatly streamlining the printing control process. Via this App, you can direct remote-control over the coordinates of each axis, adjust the extruder and hotbed temp and modify the printing status.

SPECS