BrotherHobby Hyperbola

BrotherHobby Hyperbola 5 Inch 4S Frsky XM+ BNF FPV Racing Drone

This 5 inch racer has a nice minimalist look with a rather sexy central fairing. It rests on a 3mm thick unibody carbon X-frame with a 21.2cm motor-to-engine diagonal. The engines are Brotherhobby VY 2004 at 3150KV for 3-bladed Gemfan 5125 propellers. The flight controller is the Zeus F4 from HGLRC, an integrated one which includes the flight controller itself, based on an F4 processor and flashed with Betaflight, but also an ESC 4 in 1 of 35A, all on a single component with mounting holes at 2 x 2 cm.

It is provided by a Caddx Ratel camera with a 2.1mm lens, associated with a 5.8 GHz HGLRC MT MINI video transmitter capable of transmitting at 25 mW (the maximum allowed in France) but also at 600 mW to go further. The antenna is a polarized Hyperbola. The device is equipped with an XM+ radio receiver from FrSky. The weight ? 149.5 grams without battery, under 250 grams with a 4S of less than 850 mAh. Brotherhobby recommends Lipo 4S from 650 to 850 mAh with an XT60 connector. This is a device that should appeal to lovers of good acceleration.

SPECS