helifar X140 PRO
-
1: CPU: STM32F405RGT6, dual 8K
-
2: MPU: MPU6000 - SPI
-
3: Input voltage: 2 - 4S Lipo battery
-
4: Output power: 25mW / 100mW / 200mW switchable
-
5: Video system: NTSC / PAL
helifar X140 PRO Micro FPV Racing Drone
Can you really substitute an FPV racing with a smaller drone? Absolutely. Professional and amateur racers alike want to get a micro drone to hone their skills both indoors and out, just come to see and try our helifar Micro Racing Drone! The carbon fiber frame and F4 flight controller can keep the drone well-balanced in the air, and micro brushless motor and precise transmitter give accurately integrated control of all quadcopter systems. Just strap the battery, bind with your transmitter, and get impressed by the flight performance of the little multirotor.
SPECS
Product Details
| Features |
- Stretch - X 3K carbon fiber frame with 4mm arm plate thickness - helifar F4 flight controller with MPU6000 - SPI MPU, Betaflight OSD, supports 2 - 4S Lipo - 5.8GHz 48CH 25mW / 100mW / 200mW switchable transmitter, Support Betaflight OSD adjust power and frequency. PIT MODE is 0 mW for Close-up bind. - helifar Blheli 32 4-in-1 25A ESC, support Dshot 1200, 1408 3800KV brushless motor - 2.3mm lens 600TVL CCD camera, 145 degree - With programmable LED light and 3041 four-blade propeller |
| Specification |
Frame: - Wheelbase: 145mm - Arm plate thickness: 4mm - Top and bottom plate thickness: 2mm - Side plate thickness: 1.5mm - Material: 3K carbon fiber - Weight: 49g F4 Flight Controller: - Micro F4 flight control board ( Dshot version ) - MPU: MPU6000 - SPI - CPU: STM32F405RGT6, dual 8K - Input voltage: 2 - 4S Lipo - Built-in Betaflight OSD to adjust PID - BEC output: 5V 3A - Size: 25 x 25mm board, 2mm mounting holes ( M2 ) - Weight: 2.3g - Support subs / PPM / DSMX receiver helifar ESC: - Input voltage: 2 - 4S Lipo battery - Constant current: 25A - Peak current: 30A - BEC ouput: no - Firmware: BLheli 32 - Size: 27 x 27mm ( main board ) 27 x 31mm ( including pad ) - Installing hole: 20 x 20mm, M2 - Weight: 4g - CPU: 32 - bit ARM cortex MCU 48MHz - MOS tube: top quality mosfet - Support damped mode, oneshot125, oneshot42, multishot, Dshot150 / 300 / 600 / 1200, forward and reverse FPV Transmitter: - Output power: 25mW / 100mW / 200mW switchable - Support Betaflight OSD adjust power and frequency. PIT MODE is 0 mW for Close-up bind - Frquency: short press once time to change channel CH ( CH1 - CH8 ) - Power: Long press 10s to inter power switchable mode. The LED light as follow. And short press to change the 25 / 100 / 200mW - BAT: 7 - 26V, BEC 5V - 1A - Video system: NTSC / PAL - Antenna: RPSMA - Frequency: 5.8GHz, 5 bands, 48channels with raceband: 5362 - 5865MHz - Size: 24 x 24mm ( L x W ) - Hole: 20 x 20mm - Weight: 2.4g 5.8G 600TVL CCD Camera: - Image sensor: 1 / 3 inch SONY super HAD II CCD - Horizontal resolution: 600TVL - Lens: 2.3mm - FOV: 145 degree ( 2.3mm ) - Signal system: PAL / NTSC - S / N ratio: more than 60dB ( AGC OFF ) - Electronic shutter speed: PAL: 1 / 50 ~ 100000; NTSC: 1 / 60 ~ 100000 - Autogain control ( AGC ) : yes - Back light compensation ( BLC ): yes - Illumination: Min. 0.01lux / 1.2F - WDR: D - WDR - DNR: 2DNR - Day / Night: color / auto / B and W - Power: DC 5 to 36V 5.8G Antenna: - Omnidirectional antenna - Frequency: 5600 - 6000MHz - VSWR: less than 1.2 at 5800GHz - Gain: 2.8dBi - Impedance: 50ohm - Polarization modes: vertical - Interface: SMA, RP - SMA - Weight: 4g Product weight: 0.1563 kg Package weight: 0.3063 kg Package size (L x W x H): 16.00 x 16.00 x 5.00 cm / 6.3 x 6.3 x 1.97 inches |
REVIEWS
Disclaimer Note
Ratings are based on objective reviews from our users.
More Products from helifar
HOT DEALS
Coupon for Sculpfun iCube Pro 5W Laser Engraver on Tomtop just...
In today's creative production field, a powerful and high-performance laser engraving machine has become the right hand of many artists, craftsmen and creative enthusiasts....
